Differential Pressure Flowmeters
Differential Pressure Flow Meters consist of a flow body containing some type of throttle restriction with known characteristics, such as a venturi, orifice, cone, or segmented wedge. This restriction creates a differential pressure between a pressure tap (P1) upstream of the restriction and a pressure tap downstream of the restriction (P2) which is proportional to the square of the volumetric flow rate. For a more detailed discussion of the principle of operation, please go to: http://www.smartmeasurement.com/flow-meters/differential-pressure/measuring-principle
Differential Pressure Flow Meters are excellent for very low flows or low Reynolds numbers (Re. < 500), high-viscosity fluids which contains dust or solid particles, or applications for measuring flows of liquid cement, crude oil flow meters, asphaltic oil, coal-tar oil, wastewater, hard pulp, carbon black solution, asphaltic oil, coal-tar oil, wastewater, hard pulp, carbon black solution, as well as two phase flows. SmartMeasurementTM offers Cone-Type Differential Pressure flowmeters as well as a wide selection of Differential Pressure (DP) transmitters that can be used with a customer-supplied Differential Pressure element. Volumetric calculations can be performed with the ALDP-3051 transmitter with the ALDP-3051MV multivariable transmitter has the ability to perform mass flow calculations. Please see the Differential Pressure matrix below for the best fit device for your application.
Multi-Variable Differential Pressure Transmitter
Differential Pressure Transmitter
Cone Differential Pressure Meter